Hisel 10.24 kWh Wall-Mounted LiFePO₄ Battery

Hisel 10.24kWh Wall-Mounted LiFePO4 Battery

The Hisel 10.24kWh battery provides 51.2V 200Ah nominal energy storage for a compatible residential or commercial solar system. Its wall-mounted design suits customers who want a larger battery bank while keeping floor space available. Contact Sufi Electric Store Zafarwal for the current price, supplied model, stock and inverter compatibility.

Hisel 10.24kWh Capacity and Backup Planning

The nominal energy rating comes from 51.2V multiplied by 200Ah, giving 10,240Wh or 10.24kWh. This describes stored energy rather than inverter output power. A 10.24kWh battery is not automatically a 10kW power source: the inverter and the battery’s permitted discharge current determine how much load the system can support.

Start with the appliances that must remain on during an outage. Add their running power and estimate the hours of backup required. Refrigerators, pumps and other motor loads may need additional starting power. Solar generation during daylight may contribute to the load, but backup planning should also consider outages when little or no solar energy is available.

Key Features

• Nominal voltage: 51.2V
• Rated capacity: 200Ah
• Nominal stored energy: 10.24kWh
• Lithium iron phosphate battery chemistry
• Wall-mounted installation format
• Integrated battery management system
• CAN, RS485 and RS232 communication listed for the battery series
• Parallel expansion subject to model-specific installation requirements
• No routine electrolyte topping up

Smart Battery Management and Communication

The BMS monitors battery operation and provides protective functions. With a compatible inverter and the correct communication setup, battery status information can be exchanged to support coordinated charging and discharging. Compatibility depends on the exact inverter model, firmware, battery protocol and cable pin assignment.

Before ordering the Hisel 10.24kWh battery, send us your inverter’s model number and a clear photograph of its battery connection information. A connector marked CAN or RS485 does not guarantee that two products will communicate. Your installer should confirm the applicable settings and cable rather than relying on the connector shape.

Installation and Expansion

A wall-mounted battery requires a suitable structure, secure mounting hardware and access for servicing. Plan the location before delivery, including a practical route for handling the battery. The installation must meet the supplied battery’s environmental requirements and leave the access clearances specified by the manufacturer.

DC cables, isolators, terminals and overcurrent protection must be selected for the actual installation. Parallel expansion should use batteries and configurations approved by the manufacturer. Do not assume that adding a different capacity or a battery from another brand is acceptable. Have the completed system checked and commissioned by a qualified installer.

Hisel 10.24kWh Buying Questions

How much of the nominal capacity can I use?

Usable energy depends on the configured discharge limit and operating conditions. Inverter conversion losses also reduce the energy delivered to AC appliances. Ask for a backup estimate based on your essential loads and the intended settings rather than a fixed number of hours for every household.

How is this different from a 100Ah battery?

At the same nominal voltage of 51.2V, a 200Ah battery stores twice the nominal energy of a 100Ah battery. This comparison concerns energy storage; it does not mean every electrical limit or installation requirement is identical.

Are cycle life, design life and warranty the same?

No. Cycle ratings depend on the stated test conditions, and design life describes an expected service period under specified conditions. Ask for the written warranty applicable to the supplied unit, including exclusions and the claim procedure. These figures should not be treated as interchangeable guarantees.

Price, Delivery and Model Comparison

For the Hisel 10.24kWh battery price, call Sufi Electric Store Zafarwal on 0331 4003816. Confirm stock, payment arrangements, delivery charges and whether installation, protection equipment and communication accessories are included in your quotation.

Compare the Hisel Voltex 5.12kWh battery for smaller storage requirements, or our Hisel Voltex 16.08kWh floor-standing battery for a larger nominal capacity. The official HiSEL wall-mounted battery datasheet provides reference specifications; confirm the revision applicable to your supplied battery.